Our makerspace provides access to a high-power CO₂ laser cutter, perfect for cutting, engraving, and prototyping in a wide range of materials. With a large work area and high precision, this machine is ideal for everything from detailed artwork to functional parts.
Specifications
- Type: CO₂ Laser
- Power: 100 W
- Work Area: 120 × 80 cm
- Maximum Speed: 200 mm/s
- Precision: 0.1 mm
Supported Materials
- Wood and plywood
- Acrylic and plastics (safe types only – no PVC)
- Leather and textiles
- Cardboard and paperboard
- Anodized aluminum (engraving only)
Always check the material safety guidelines before use.
Workflow
- Prepare your design in vector software (e.g., Inkscape, Illustrator, CorelDRAW).
- Export to the required file format (usually
.dxfor.svg). - Use the dedicated laptop in the makerspace with Lightburn license to prepare your design for cutting.
- Load material securely on the cutting bed.
- Configure power, speed, and focus settings according to the material.
- Run a small test cut before starting the full job.
Safety & Best Practices
- Never leave the laser cutter unattended while operating.
- Always turn on the exhaust ventilation before starting a job.
- Ensure materials are approved and free of toxic coatings.
- Keep a fire extinguisher nearby and know where the emergency stop button is.
- Clean the work area after use.
- Place leftover scrap materials in the assigned containers, next to the laser cutter.
Additional Tools & Equipment
- Calipers and rulers for precise measurement
- Tape and clamps for material positioning
- Air assist system for clean cuts
- Computer workstation with design software
Getting Started
New members must complete an introduction to the laser cutter before first use. This ensures you understand the software, machine setup, and safety procedures.
